Southbend®

Gas Convection Steamer, 2 Compartments, 10 Pan, 24" Cabinet, 115V - Natural Gas, 140000 Total BTUs

Model GCX-10S_NG · by Middleby

Price as of Aug 3, 2026. Delivery and installation quoted with your order.

The convection steamer's cabinet base is specified with a full-perimeter angle frame, reinforced counter and boiler mountings, gas boiler with controls, all-stainless-steel exterior, hinged door(s) with magnetic latch, and stainless-steel legs fitted with adjustable flanged feet. GCX-10S. Standard features listed are a water treatment system, CSD-1 boiler controls, electronic ignition, automatic blowdown, split water line, and a drain tempering system for a 140-degree temperature requirement; the drain tempering system requires a 1/2-inch cold-water connection. The control housing is accessible through a fully removable side panel. Each compartment includes a 60-minute mechanical timer with a ready pilot, cooking pilot light, and audible signal that sounds at the end of the cooking cycle. The cooking chambers are all-welded type 316 stainless steel, fully insulated, and provided with removable stainless-steel pan supports. The GCX-2S and GCX-10S models use natural gas at a water-column pressure of 7–14 in [178–355 mm]. The gas-fired steam boiler is rated at 9–11 psi (62–76 kPa). The required supply-line size for the GCX steamer gas connection is 3/4 in [19 mm]. The steamer controls are specified for operation at a supply voltage of 115 VAC. The GCX steamer electrical supply is 120 VAC. The steamer controls are specified for operation at a supply frequency of 50/60 Hz. The steamer controls are specified for operation on a single-phase supply.

For exact dimensions and utility requirements, see the spec sheet.