Southbend®
Gas Steam Kettle, Tilt Tri-Leg, 80 Gallon, 2/3 Jacket, 120K Total BTUs – Propane, 150000 Total BTUs
Model KTLG-80_LP · by Middleby
Price as of Aug 3, 2026. Delivery and installation quoted with your order.
KTLG-80. The supplied KTLG-80 and KTLG-100 kettles are tilting kettles. The KTLG-80 kettle has a capacity of 80 gallons [302.8 liters]. Standard controls include a water sight glass, cooking light, pressure gauge, electronic ignition with ignition indicator light, motor ON/OFF switch with indicator light, and tilt switch. The KTLG-80 and KTLG-100 kettle gas supply rating is 150,000 BTU/hr. The KTLG-80 and KTLG-100 kettle gas supply pressure for propane is 11–14 in. W.C. [279–356 mm]. The KTLG-80 … gas steam kettles operate on a rated supply voltage of 120 VAC. The KTLG-80 and KTLG-100 kettle electrical connection has a total maximum current draw of 4.0 A. The jacket is a double-wall interior around the lower 2/3 of the kettle and contains factory-sealed distilled water. Safety features include low water shut off with indicator light, pressure switch, and pressure relief valve. The kettle pivots on trunnions connected to the power tilt mechanism and control consoles; the tilt mechanism allows the kettle to tilt past 90° for complete emptying. The console is drip proof, stainless steel clad, and supported on all-welded 1-5/8” (41 mm) diameter stainless-steel legs with flanged feet for securing to the floor.
Specifications
- Amperage
- 4 A
- Back clearance
- 4 in
- Capacity
- 80 gal
- ENERGY STAR certified
- No
- Fuel type
- gas
- Gas input
- 150000 BTU
- Gas supply pressure
- 11–14 in. w.c. [279–356 mm]
- Gas type
- propane
- Highest temperature setting
- 275 F
- Lowest temperature setting
- 165 F
- NSF certified
- Yes
- Open kitchen enabled
- No
- Outdoor use
- indoor only
- Overall width
- 60.87 in
- Plug type
- nema 5-15
- Product or accessory
- product
- Professional installation required
- Yes
- Side clearance
- 0 in
- Steam jacket coverage
- lower 2/3
- Voltage
- 120 V
For exact dimensions and utility requirements, see the spec sheet.
