← Back to catalog
Southbend_BGLM_40N_BraisingPan_PhotoMain

Southbend®

Narrow Gas Tilt Skillet with Manual Tilt– Propane, 100000 Total BTUs

Model BGLM-40N_LP · by Middleby

$27,551

Price as of Aug 3, 2026. Delivery and installation quoted with your order.

Braising Pan & Tilt Skillets

The BGLM-40N narrow gas tilting skillet has a 40-gallon capacity. The BGLM-40N gas tilt skillet uses gas as its heating fuel. gas type: propane. The BGLM-40N has a listed gas input of 100,000 BTU/hr (29.3 kW/hr). The BGLM-40N and BGLM-60N narrow gas tilting skillets are supplied with manual tilt. The controls for the Southbend BGLM-40N and BGLM-60N narrow gas-fired skillets include a solid-state thermostat. The controls for the BGLM-40N and BGLM-60N narrow gas tilting skillets can be set as low as 100°F. The controls for the BGLM-40N and BGLM-60N narrow gas tilting skillets can be set as high as 450°F. The pan is formed from 10 gauge type 304 stainless steel with a #4 finish exterior and polished interior, with coved corners for ease of cleaning. The cooking surface is 3/4-inch triple-ply construction with a 3/8-inch-thick aluminum core for even heat distribution over the entire cooking surface. The Southbend Steam BGLM-40N and BGLM-60N narrow gas-fired skillets have a cover as part of their standard construction. The stainless steel cover has spring-assist hinges, a full-width handle, a no-drip condensate guide, and a vent port with swing cover.

Specifications

Amperage
2 A
Capacity
40 gal
Control type
solid-state
ENERGY STAR certified
No
Fuel type
gas
Gas inlet size
0.75 in
Gas input
100000 BTU
Gas supply pressure
11–14 in. w.c. (279–356 mm)
Gas type
propane
Highest temperature setting
450 F
Installation type
floor
Lowest temperature setting
100 F
NSF certified
Yes
Open kitchen enabled
No
Outdoor use
indoor only
Overall width
48 in
Phase
single-phase
Plug type
field wired per local code
Product or accessory
product
Professional installation required
Yes
lid included
Yes
tilt mechanism
manual

For exact dimensions and utility requirements, see the spec sheet.

Documents