Carter-Hoffmann®
HP40 Shelf-Mounted Plate Warmer for Plates up to 12-3/4" Diameter, 193 lbs. Weight Capacity - 120V, 1PH
Model HP40 · by Middleby
Price as of Aug 3, 2026. Delivery and installation quoted with your order.
The HP40 shelf-mounted plate warmer has an overall width of 40 in (1016 mm). The HP40 shelf-mounted plate warmer has an overall depth of 18 1/2 in (470 mm). HP Series plate warmers accommodate plates up to 12 3/4 in in diameter. HP Series plate warmers operate on 120 volts. HP Series plate warmers are single phase. The heating system on HP Series plate warmers uses convection heating. Controls include a recessed on/off switch, a red power-on indicating light, and a red low-temperature indicating light for auto-reset high limit. The HP Series plate warmer heating system is factory set for 155 degrees. The HP Series plate warmer temperature range has a lower endpoint of 120 degrees. The HP Series plate warmer temperature range has an upper endpoint of 185 degrees. Completely welded double wall cabinet construction. High density fiberglass insulation.
Specifications
- Coating / finish
- polished
- Construction material
- stainless steel
- Control features
- on-off switch
- Cord exit location
- right end
- ENERGY STAR certified
- No
- Heat style
- convection type
- Hertz
- 60 Hz
- Interior width
- 37 in
- Model number
- hp40
- NSF certified
- Yes
- Open kitchen enabled
- No
- Outdoor use
- indoor only
- Overall depth
- 18.5 in
- Overall height
- 22.4 in
- Overall width
- 40 in
- Phase
- single phase
- Plug type
- nema 5-20
- Power cord length
- 72 in
- Product or accessory
- product
- Product series
- hp series
- Professional installation required
- Yes
- UL listing
- Yes
- Voltage
- 120 V
- heated or unheated
- Yes
- number of wires
- 3
For exact dimensions and utility requirements, see the spec sheet.