Carter-Hoffmann®

PBH2S Combination Base & Plate Heater, 2 Silo - 208V, 1PH with Four Corner Bumpers

Model PBH2S_CB · by Middleby

Price as of Aug 3, 2026. Delivery and installation quoted with your order.

The PBH2S is a combo base and/or plate heater. The PBH2S has 2 independently controlled silos. Heavy-duty stainless steel drop-in dispenser tubes hold plates and bases up to 10.25” in diameter. … A pulley and cable leveling system has field-adjustable springs to accommodate plates or bases; … the number of connected springs can be increased or decreased to change platform tension. … Disconnected springs remain in place and out of the way during dispensing. … Engineered holes facilitate airflow. … Cantilevered spring cables extend spring life. 2 Silo - 208V, 1PH. The PBH2S draws 15.4 amps. The PBH2S operates at 60 Hz. A high-velocity blower air system heats bases or plates under thermostatic control. The fan motor is thermally protected and has long-life bearings. The heaters have high-limit overheat protection, a base/off/plate toggle switch, and a pilot/cycle light. A guarded toggle switch controls operation. … PBH heaters have two independently controlled silos to heat plates and/or bases at the same time. … The center switch position is off; a red indicator lamp illuminates when on. All finished exterior construction is stainless steel, 18 gauge 300 stainless steel. All sides, top and bottom are insulated for heat retention and energy efficiency. All seams are turned in to eliminate raw edges. The exterior has a wrap-around, single-piece panel. Stainless steel, full width, 1” tubular push handle located on swivel end. Hooks on each end to hang lids when dispensing.

For exact dimensions and utility requirements, see the spec sheet.