Follett®
Single Door Upright Ice Storage Bin
Model SG1160S-56 · by Middleby
Price as of Aug 3, 2026. Delivery and installation quoted with your order.
The single-door upright ice storage bin provides manual ice removal with a scoop or shovel. The SG1160S-56 ice storage bin has a maximum bin capacity of 1,170 lb (531 kg), calculated on the cubic volume of the bin; the figure does not reflect voids that can occur due to pyramiding. The SG1160S-56 ice storage bin is 56.00 in (142.2 cm) wide (W1). The single-door upright ice storage bin measures 39.00 in (99.1 cm) in depth with the lower door assembly in place. The bin comes assembled; simply screw in the legs. … It is only 31.00" (78.7 cm) deep to fit through standard door openings by removing the front door assembly (4 screws, no sealant). The bin has a full stainless exterior, a corrosion-resistant poly bin liner and top, a heavy duty “stay-open” PowerHinge™ door hinge for easy one-hand opening and closing without door catches, and a molded-in gasket that never needs to be replaced. The bin is compatible with cube ice, flake ice and customer preferred Chewblet® ice. The industry exclusive SmartGATE® ice shield controls the flow of ice to reduce spills and limit contact with ice. It locks in three positions and returns easily to the full down position even when the bin is full. The single-door upright ice storage bin drain has a 1.00 in FPT connection. The single-door upright ice storage bin drain is located at the center of the bin bottom. The single door upright ice storage bins covered by this specification are NSF-listed.
Specifications
- Door style
- side-hinged
- Drain connection size
- 1 in
- Drain location
- centered on the bin bottom
- ENERGY STAR certified
- No
- Form factor
- floor
- Insulation system
- non-hfc foam
- Open kitchen enabled
- No
- Outdoor use
- indoor only
- Overall depth
- 39 in
- Overall width
- 56 in
- Product or accessory
- product
- Professional installation required
- Yes
- product type
- ice storage bin
For exact dimensions and utility requirements, see the spec sheet.
