Southbend®
Platinum Sectional, Gas, 12", Hot Top, Cabinet Base – Propane, 32000 Total BTUs
Model P12C-H_LP · by Middleby
Price as of Aug 3, 2026. Delivery and installation quoted with your order.
The 12-inch-wide sectional range with full-width uniform hot top is available with a cabinet base. The P12-H uniform hot top has a stated input of 32,000 BTU for the LP configuration. The hot top has removable steel plates. The cabinet base is stainless steel and has a removable door that can hinge on the right or the left. The exterior finish uses #3 polished 430 and 304 stainless steel on the front, sides, rear, and exterior bottom. The P12-H sectional range has a 1 in rear gas connection. The rear gas connection on each Southbend P12-H sectional unit has a male NPT connector. The P12-H range requires 12 in minimum clearance from combustible construction at the rear. The P12-H range requires 10 in minimum clearance from combustible construction at the sides. The P12-H range requires 0 in clearance from noncombustible construction. The P12-H sectional units require a regulated gas supply.
Specifications
- Configuration level
- cabinet
- ENERGY STAR certified
- No
- Form factor
- floor
- Fuel type
- gas
- Gas inlet size
- 1 in
- Gas input
- 32000 BTU
- Gas type
- propane
- Number of vats
- 1
- Open kitchen enabled
- No
- Outdoor use
- indoor only
- Overall width
- 12 in
- Product or accessory
- product
- Professional installation required
- Yes
- Side clearance
- 10 in
- Working height
- 36 in
For exact dimensions and utility requirements, see the spec sheet.