Anets®
AGP75-SSTC High Production Gas Fryer 18"X18" Fryer with Solid State Thermostat Controls – Natural Gas, 105000 Total BTUs
Model AGP75-SSTC_NG · by Middleby
Price as of Aug 3, 2026. Delivery and installation quoted with your order.
The short-form specification describes an Anets AGP tube-fired, high-efficiency / high-production gas floor fryer with a stainless peened tank, stainless front, door, and sides. The AGP75 fryer has an oil capacity of 75 Lbs (34 kg). The AGP75 Series fryer has an 18 in frying-area depth. The AGP75 Series fryer has an 18 in frying-area width. gas type: natural gas. gas input btu: 105000. The natural-gas configuration requires store supply pressure of 7–10 in. w.c. (17.4 mbars / 1.7 kPa). The Solid State T-Stat control on Anets Platinum (AGP) Series fryers includes a melt cycle. The Solid State T-Stat control on Anets Platinum (AGP) Series fryers includes a boil out mode. The tank is stainless-steel construction; the cabinet has a stainless-steel front, door, and sides. The fryer draws 0.4 A at 208/220–240V. The fryer draws 0.7 A at 115V.
Specifications
- Container material
- stainless steel
- Control type
- solid-state
- ENERGY STAR certified
- No
- Frying area depth
- 18 in
- Frying area width
- 18 in
- Fuel type
- gas
- Gas input
- 105000 BTU
- Gas supply pressure
- 7–10 in. w.c. (17.4 mbars / 1.7 kpa)
- Gas type
- natural gas
- Installation notes
- must not be installed over the anets agp fryer flue
- Oil capacity
- 75 lb
- Open kitchen enabled
- No
- Operation mode
- boil-out mode
- Outdoor use
- indoor only
- Overall width
- 19.63 in
- Plug type
- nema 5-15
- Product or accessory
- product
- Product series
- anets platinum (agp) series
- Professional installation required
- Yes
- Voltage
- 115 V
- leg height
- 9 in
- temperature / operating modes
- melt mode
For exact dimensions and utility requirements, see the spec sheet.