← Back to catalog
Blodgett_DFG-100-200_ConvectionOven_PhotoAlternate_03
Blodgett_DFG-100-200_ConvectionOven_PhotoAlternate_02Blodgett_DFG-100-200_ConvectionOven_PhotoAlternate_01Blodgett DFG ESADDL ConvectionOvenBlodgett_DFG_100SGL_Oven_PhotoMain_2Blodgett_DFG_100SGL_Oven_PhotoMain_3Blodgett_DFG_100SGL_Oven_PhotoMain_0Blodgett_DFG_100SGL_Oven_PhotoMain_1Blodgett_DFG_100SGL_Oven_PhotoMain_4Blodgett_DFG_200SGL_Oven_PhotoMain_1Blodgett_DFG_200SGL_Oven_PhotoMain_5Blodgett_DFG_200SGL_Oven_PhotoMain_0Blodgett_DFG_200SGL_Oven_PhotoMain_4

Blodgett®

DFG-200-ES Additional Section Premium ENERGY STAR Qualified Gas Convection Oven – Natural Gas, 50000 Total BTU

Model DFG-200-ESADDL_NG · by Middleby

$19,453

Price as of Aug 3, 2026. Delivery and installation quoted with your order.

Convection Ovens

The Blodgett DFG-200-ES is a convection oven. The Blodgett DFG-200-ES is identified with an ENERGY STAR mark. The DFG-200-ES baking compartment accepts five standard full-size 18 in × 26 in baking pans in left-to-right or front-to-back positions. The DFG-200-ES solid-state thermostat has a temperature control range of 200°F (93°C) to 500°F (260°C). The DFG-200-ES maximum gas input is 50,000 BTU/hr (14.6 kW) per oven section. The DFG-200-ES natural-gas configuration requires an inlet pressure of 7.0 in. W.C. minimum to 10.5 in. W.C. maximum. Air in the baking chamber is distributed by a single-inlet blower wheel powered by a two-speed motor with thermal overload protection. The DFG-200-ES has an oleophobic 14 gauge steel liner; its front, top and sides are stainless steel.

Specifications

Burner or heat source type
removable inshot burners.
Burner pressure
3.5 in_WC
Clearance requirements
0” (0)mm) from combustible and non-combustible construction.
Control features
manual cooking, recipe cooking, cook and hold, core probe cooking, fan delay, and fan pulse.
Control platform / interface
artisan touchscreen control with meat probe.
Door handle
ergonomically friendly, curved aluminum door handle with simultaneous door operation.
ENERGY STAR certified
Yes
Exterior construction
stainless steel front, top, and sides.
Form factor
floor
Fuel type
gas
Gas inlet size
0.75 in
Gas input
50000 BTU
Gas supply pressure
7.0 in. w.c. minimum to 10.5 in. w.c. maximum
Gas type
natural gas
Insulation system
1” solid block plus 1” mineral fiber insulation for a total of 2” of insulation.
Interior construction
full angle-iron frame.
Interior depth
24.25 in
Interior height
20 in
Interior width
29 in
Lighting type
interior halogen lights.
Maintenance access
ball bearing slide out front control panel for easy servicing.
Number of speeds
2 count
Open kitchen enabled
No
Outdoor use
indoor only
Overall width
38.25 in
Plug type
field wired per local code
Product or accessory
product
Professional installation required
Yes
Switch location
manual gas service cut-off switch located on the front of the control panel.
Temperature range
200 F
Use / placement
for commercial use only.
Voltage
115 V
ignition type
electronic
system / format
direct fired gas system.

For exact dimensions and utility requirements, see the spec sheet.

Documents