Carter-Hoffmann®
CW1 Heated Chip Warmer, 20 Gallon Chip Capacity - 120V, 1PH with Bottom Poly Clear Door
Model CW1_120V_1PH_CLRDR · by Middleby
Price as of Aug 3, 2026. Delivery and installation quoted with your order.
product type: nacho chip warmer. The CW1 Nacho Chip Warmer has a stated chip capacity of 2.75 cubic feet, approximately 20 gallons of chips. The CW1 Nacho Chip Warmer draws 8.7 A at the stated 120 V, single-phase electrical configuration. The CW1 Nacho Chip Warmer has an internal mechanical thermostat, factory pre-set to 175°F. … It is adjustable with tools via an access hole with grommet located on the rear of the cabinet. … An on/off switch has a power-indicating light. The top-mounted convection heater has a blower for quick heat up and recovery and even heat distribution throughout the cabinet. The CW1 Nacho Chip Warmer has completely welded cabinet construction, with the outer cabinet welded to the cabinet liner. The CW1 Nacho Chip Warmer has high-density fiberglass insulation, full 1 in thick, continuous wrap-around type in the bottom and sides. The CW1 Nacho Chip Warmer has an overall depth of 25½ in. The CW1 Nacho Chip Warmer has an overall height of 27¼ in, including 4 in legs.
Specifications
- Amperage
- 8.7 A
- Body material
- all stainless steel
- Capacity
- 2.75 gal
- Construction material
- stainless steel
- Control features
- on/off switch
- ENERGY STAR certified
- No
- Fuel type
- electric
- Heat style
- convection heating
- Hertz
- 60 Hz
- Insulation thickness
- 1 in
- Interior capacity
- 2.75 cu ft
- Mounted on casters
- No
- Open kitchen enabled
- No
- Outdoor use
- indoor only
- Overall depth
- 25.5 in
- Overall height
- 27.25 in
- Overall width
- 28.38 in
- Phase
- single phase
- Plug type
- nema 5-15
- Product or accessory
- product
- Professional installation required
- No
- Voltage
- 120 V
- leg height
- 4 in
- product type
- nacho chip warmer
For exact dimensions and utility requirements, see the spec sheet.