Carter-Hoffmann®
CW2E Heated Chip Warmer, 22 Gallon Chip Capacity - 120V, 1PH
Model CW2E_120V_1PH · by Middleby
Price as of Aug 3, 2026. Delivery and installation quoted with your order.
product type: nacho chip warmers. CW2E. The CW2E nacho chip warmer has a capacity of 3.00 cubic feet, approximately 22 gallons of chips. 120V, 1PH. The CW2E and CW4E nacho chip warmers use forced-air heating. Capable of heating to 190°F (88°C). Preheat to 160°F (71°C) in approximately 20 minutes. Internal mechanical thermostat. Factory pre-set temperature of 175°F (79°C). Adjustable with tools via access hole with grommet; located on rear of heating unit. On/off switch with power indicating light. Completely welded cabinet construction with outer cabinet welded to cabinet liner. Extended side panels reduce chip spillage. High density fiberglass, full 1” thick continuous wrap-around type in top, bottom and sides. The CW2E nacho chip warmer has an overall width of 22 3/4 in (578 mm). The CW2E nacho chip warmer has an overall depth of 23 in (584 mm). The CW2E nacho chip warmer has an overall height of 38 3/4 in (984 mm).
Specifications
- Body material
- entirely of stainless steel
- Cleaning access
- easy cleaning
- ENERGY STAR certified
- No
- Exterior construction
- all-stainless-steel exterior
- Fuel type
- electric
- Heat style
- forced-air heating
- Hertz
- 60 Hz
- Insulation thickness
- 1 in
- Insulation type
- continuous wrap-around insulation
- Interior capacity
- 3 cu ft
- Model number
- cw2e
- Number of wires
- three wires
- Open kitchen enabled
- No
- Outdoor use
- indoor only
- Overall depth
- 23 in
- Overall height
- 38.75 in
- Overall width
- 22.75 in
- Phase
- single phase
- Plug type
- nema 5-15
- Product or accessory
- product
- Professional installation required
- No
- UL listing
- Yes
- Voltage
- 120 V
- product type
- nacho chip warmers
For exact dimensions and utility requirements, see the spec sheet.