Southbend®
Platinum Sectional, Gas, 24", 24" Plancha, Cabinet Base – Natural Gas, 32000 Total BTUs
Model P24C-PP_NG · by Middleby
Price as of Aug 3, 2026. Delivery and installation quoted with your order.
The Southbend P24-PP sectional range is 24 in (610 mm) wide, as dimensioned in the front view. The P24C-PP configuration has a cabinet base under the plancha griddle. The plancha griddle is a 1/2-inch-thick reinforced steel plate powered by cast iron burners, providing fast preheat and recovery time. Its high-heat zone, with maximum temperatures of 800°F, is located on the front 2/3 of the plate for quick sear, with decreased temperatures on the rear 1/3 of the plate for product finishing. Plancha units do not allow specific temperature operation. The Southbend P24C-PP model has a gas input of 32,000 BTU/hour when configured for natural gas. The 24-inch sectional range uses battery spark ignition. The cabinet-base model has a stainless steel cabinet base with a removable door that can hinge on the right or the left. The standard exterior finish is #3 polished 430 and 304 stainless steel on the front, sides, rear and exterior bottom.
Specifications
- Configuration level
- cabinet
- ENERGY STAR certified
- No
- Form factor
- floor
- Fuel type
- gas
- Gas inlet size
- 1 in
- Gas input
- 32000 BTU
- Gas type
- natural gas
- Open kitchen enabled
- No
- Outdoor use
- indoor only
- Overall width
- 24 in
- Product or accessory
- product
- Professional installation required
- Yes
- ignition type
- battery spark
For exact dimensions and utility requirements, see the spec sheet.