Southbend®
Steam Coil Convection Steamer, 2 Compartments, 10 Pan, 24" Cabinet, 115V
Model SCX-10S · by Middleby
Price as of Aug 3, 2026. Delivery and installation quoted with your order.
The steamer is a Southbend steam coil convection steamer on a modular steam coil boiler base. 2 Compartments. Each SCX-10S and SCX-10S-36 compartment accommodates 10 pans at 1 in pan depth. Each SCX-10S and SCX-10S-36 compartment accommodates 5 pans at 2-1/2 in pan depth. The steamer boiler is equipped for incoming steam pressure of 25–45 psi. A pressure-reducing valve is required for the steamer if incoming steam pressure exceeds 45 PSI [310 kPa]. Boiler controls include automatic water-level control, a pressure gauge, a water-gauge glass, operating-pressure control, safety high-limit pressure control, and a safety relief valve. Each compartment has a pilot ready light and a pilot cooking light, and its 60-minute electric timer sounds an audible signal at the end of the cooking cycle. Each steamer compartment has independently controlled timing. The steamer is constructed of satin-finish type 304 stainless steel, with a one-piece, all-welded type 316 stainless-steel cooking chamber. Steam flow to the chamber is cut off when the door is opened during the cooking cycle and reactivated when the door is closed.
Specifications
- CSA listing
- c-csa-us certified
- Drain connection size
- 2 in
- Drain connection type
- ips type
- Drain requirements
- to be piped to an open floor drain
- ENERGY STAR certified
- No
- End connection style
- female pipe connection
- Fuel type
- steam
- Hertz
- 60 Hz
- Open kitchen enabled
- No
- Outdoor use
- indoor only
- Overall width
- 24 in
- Phase
- single-phase
- Pipe connection size
- 0.75 in
- Plug type
- field wired per local code
- Product or accessory
- product
- Professional installation required
- Yes
- Water inlet connection size
- 0.5 in
- Wok hole diameter
- 0.4375 in
- leg height
- 6 in
- leg material
- stainless steel
For exact dimensions and utility requirements, see the spec sheet.